Описание

  • For sealing with O-rings
  • With snap-action switching element
  • Plunger material stainless steel
  • Any installation position
Switching elementSnap-action switching contact, 1 changeover contact Single hole fixing limit switches must not be used as an end stop.
Design Thread M12 x 1
Housing material Stainless steel
Ambient temperature -20 ... +80 °C
Degree of protection IP65
Mechanical life 1 x 106
Contact material Silver alloy, gold-plated
Switching principle Snap-action switching contact
Repeat accuracy (absolute) ±0,01 mm
Installation orientation Any
Number of NC contacts 1
Number of NO contacts 1
Connection PUR cable
Cable length 2,5 m
Approach speed 0,01 ... 8 m/min
Actuating element Domed plunger
Actuating force
Approx. 16 N
Electrical connection ratings
Utilization category according to EN 60947-5-1
AC-15 0.5A 230V
DC-13 0.6A 24V
Short circuit protection according to IEC 60269-1 2A gG
Rated insulation voltage Ui 250 V
Rated impulse withstand voltage Uimp 2,5 kV
Switching voltage
min. 12 V
Switching current
Min. at 24V 10 mA
Connection cross-section 0,5 mm?
Other
C number
C2452 Domed plunger
''