Описание

  • With reed contact and protective diode
  • Plunger material stainless steel
  • Any installation position
Switching elementReed contact, 1 NC contact Never switch incandescent lamps. Not even for test purposes. Single hole fixing limit switches must not be used as an end stop. Dimension drawing Wiring diagram Dimension drawingWiring diagram Technical dataApprovals Mechanical values and environment
Design Thread M12 x 1
Housing material
Sleeve Plastic
Threaded section Stainless steel
Ambient temperature
Cable static -25 ... 80 °C
Degree of protection IP68
Mechanical life 30 x 106
Contact material Rhodium
Switching principle Reed contact
Repeat accuracy (absolute) ±0,01 mm
Installation orientation Any
Number of NC contacts 1
Connection PUR cable
Cable length 5 m
Approach speed 0,01 ... 8 m/min
Actuating element Domed plunger
Actuating force
Approx. 16 N
Electrical connection ratings
Utilization category according to EN 60947-5-1
DC-13 0.3A 24V
AC-12 0.3A 30V
Short circuit protection according to IEC 60269-1 0.4A gG
Rated insulation voltage Ui 50 V
Switching voltage
min. 1 V
Switching current
Min. at 24V 1 mA
Connection cross-section 0,5 mm?
''